Radix epsilon Bedienerhandbuch PDF herunterladen (Seite 7)

Version 1.0 Page 7

5 Installing Your Receiver

5.1 Before You Start

CAUTION:

Do not place the receiver near any heat sources or in strong sunlight.

Protect all cables from damage caused, for example, by sharp edges.

This appliance must only be used with a mains voltage of 230 V (± 10%), 50 Hz.

Install the antenna in accordance with the manufacturers instructions.

All of the information needed for programming the receiver will be automatically called up:

- your time zone (= deviation from GMT – see appendix),

- summer time yes/no,

- picture format for your TV,

- The appropriate LNB oscillator frequency (referred to in the “LNB Local-Frequency” menu),

- Programme frequencies and polarities for manual programming (available in satellite magazines,

specialist stores).

You must program the EPSILON 1 FTA before use. Full instructions are provided in Section 6.

Installing Your Receiver

1 2 3 4 5 6 7 8 9 10 11 12 ... 31 32

Keine Kommentare

Radix epsilon Bedienerhandbuch Seite 7