Radix DMC-4000T Betriebsanleitung PDF herunterladen (Seite 194)

100

101

6 Communication settings and guide of HMI connecting with controller

set] button to save the settings.

2. Operation set

3. Open set

In line 1 [protocol] selection "UDP" protocol; and that [open in pairs] option selecte "pairs",system will be

prompted to

，selection is confirmed, the parameters of line 2 will be

self-generated, so as to form a two-way communication. PLC's port and PC port range is & H401 - &

HFFFF, the example is set to & H1000, PC's IP address is your computer's IP. Click [End set] to save, and

form an Ethernet module and host two-way communication channel.

4. Just write to set the PLC in the main menu selection [online]->"PLC write", the "PLC/network

parameters" in the content downloaded to the PLC, the correct execution, the writing on the work of the

Ethernet parameters completed.

- 191 -

1 2 ... 189 190 191 192 193 194 195 196 197 198 199 ... 330 331

Kommentare zu diesen Handbüchern

Keine Kommentare

Radix DMC-4000T Betriebsanleitung Seite 194

Kommentare zu diesen Handbüchern