Radix DMC-4000T Betriebsanleitung PDF herunterladen (Seite 272)

100

101

6 Communication settings and guide of HMI connecting with controller

2. Specifying module position

If your PC is connected to the S7-200, click the “Read modules” button to determine the position of

the CP 243-1 module automatically. Otherwise, the module position can also be entered manually.

Important:

The panel can only establish a connection with a Cp243-1 if the module is configured to “position 0”.

 Check if the CP is connected in the module position “ZERO” and change the module position if

necessary.

 Identify or enter the module position “ZERO”.

 Click on “Next”.

3. Specifying IP address

 Define an IP address for the CP 243-1.

Caution:The IP address for this application may not be taken automatically from a server because the

panel requires a fixed reference partner (CP 243-1) for the Ethernet communication.

Note: The communication connection type for this module can be defined by the “Automatic Setting”.

 Click on “Next” to continue.

- 269 -

1 2 ... 267 268 269 270 271 272 273 274 275 276 277 ... 330 331

Kommentare zu diesen Handbüchern

Keine Kommentare

Radix DMC-4000T Betriebsanleitung Seite 272

Kommentare zu diesen Handbüchern